Air Conditioning Engineer

Position Sought Air Conditioning Engineer
Name CAN – 41591
Lives in Warminster
Qualifications C&G 2078 Safe Handling of Refrigeration

C&G L2 Hydrocarbon Refrigeration

17 Edition

Previous Employers XXXXXX XXXXXXXX

XXXXX XX

XXXXXXX XXXXXXXXXXX XXXXXXXX

Availability 2 – 4 Weeks’ Notice
General Notes if Applicable Is experienced with all aspects of PPMs and Reactive works as is completing Multi Skilled roles on large commercial contracts

For more information relating to this CV please contact:

 

Simon Cheetham 

HVAC Recruitment Ltd

01745 772218  

07500049780

simon@hvacrecruitment.com

 

Profile:

A competent, motivated, professional Engineer with a wide range of experience and excellent transferable multi discipline skills. Able to work under own initiative or as part of a team. Proven leadership and communication skills incorporating the management and motivation of others to achieve common goals. Where possible “hands on” approach to problem solving is favored utilising sound knowledge of practical engineering principles. Constantly working to the highest possible standards with total commitment and pride in work. Not afraid to listen and take note from others. Strives to provide clear and precise instruction to allow high quality standards to be achieved

Qualifications:

  • City and Guilds Level 2 award in Hydrocarbon refrigeration, Air conditioning and heat pump system installation, service and maintenance
  • City and Guilds unit credit towards competent person in mechanical systems
  • City and Guilds 17th Edition Level 3 award BS 7671: 2008 (2015)
  • UKC/FS/Part P Electrical Installation Domestic
  • Pasma Tower Scaffold to 4.2m course
  • Mitsubishi Electric AG 150 Centralised Controls Course
  • Mitsubishi Electric M and P Series Systems Course
  • City & Guilds Level 2 in F Gas & ODS Regulations; Category 1
  • DUK-SE11 Daikin Altherma ”Low Temperature”
  • Air Source Heat Pump Installation and Commissioning Course
  • First Aid, Appointed Person
  • 1 Day Advanced Drivers Course
  • Skill Card, Refrigeration / Air Conditioning, Reg No 1746279
  • City & Guilds 2078
  • CAT 4 Contractor Status
  • City & Guilds 244 Industrial Electronics
  • City & Guilds Part One in Motor Vehicle Craft Studies
  • City & Guilds Part Two in Motor Vehicle Mechanics Craft Studies
  • BTEC National Certificate in Engineering
  • BTEC Higher National Certificate in Motor Vehicle Management
  • Stage 3 Skills Assessment
  • National Craft Certificate Light Vehicle Mechanic
  • Awarded Apprentice of the year

Employment History:

XXXXXX XXXXXXXX

Air Conditioning Engineer

August 2018 – Present

  • Field based engineer working for Accent services ltd who subcontract to many of the major F.M. companies
  • Key Responsibilities:
  • Planned P.P.M.s on air conditioning split, multi splits, VRV, and VRF systems
  • Planned P.P.M.s on chillers and computer room cooling systems
  • FGAS leak test to comply with Fgas regulations
  • Reactive breakdown calls to included diagnostics
  • Repairs, fitting new components, and recommissioning
  • Costing and quote preparation of remedial repair works

XXXXX XX

Multi-skilled Technician Refrigeration / Air Conditioning

January 2017 – August 2018

  • Based at Porton Down working on the Porton Biopharma Ltd contract, a pharmaceutical product research and production facility
  • Key Responsibilities:
  • Working to GMP Standards
  • Carry out planned preventative maintenance to chillers, cold rooms, air conditioning units both VRV, multi splits and splits, cold room freezers, standalone fridges, freezers, ultra-low temperature -80 freezers and freeze dryer system
  • Carry out reactive diagnostic and repairs
  • Daily and monthly checks on clean steam generators, water for injection stills, reverse osmosis systems and water softeners
  • Complete all paperwork to meet GMP specifications in a timely manner

XXXXXXX XXXXXXXXXXX XXXXXXXX

Senior HVAC Service & Commissioning Engineer

September 2013 – April 2016

  • Elliott Environmental is a Somerset based young company who provide design, installation and service of HVAC, heating and air conditioning systems, including air source heat pumps; covering the South of the UK
  • Key Responsibilities:
  • Servicing and maintenance of HVAC and VRV air conditioning to manufactures specifications
  • Commissioning of HVAC and VRV systems to industry standards
  • Fault finding, diagnostics and repairs
  • F gas regulations compliance of refrigeration systems
  • Service, diagnostics and repair of commercial chillers

Rochford Garden Machinery Ltd                  

After Sales Manager

August 2012 – September 2013

  • Rochford is a family run garden machinery and professional machinery, importer, wholesaler, retailer and service provider. They offer their own brand of garden machinery and are sole UK importers for 5 other brands
  • Key Responsibilities
  • Directly manage the service team
  • Provide the after sales experience to both John Deere domestic & professional customers
  • Manage and achieve financial targets for the service team, ensuring operating ratio is in line sales v hours sold
  • Professionally develop the skills and knowledge of the service team
  • Work with other departments across the organisation
  • Develop sales opportunities for selling the service department

D.A Phillips Garden Machinery

Principle Service Engineer

May 2011 – August 2012

  • J Phillips is a specialist fine turf machinery supplier, with full repair and maintenance facilities
  • Key Responsibilities:
  • Diagnostic & fault finding
  • Engineering solutions
  • Service and maintenance
  • Customer liaison
  • On-site service

Knights Refrigeration

Senior Engineer

August 2010 – May 2011

  • Knights Refrigeration install, service and commission commercial refrigeration, air conditioning and cooling systems throughout Dorset, Wiltshire and Somerset. Providing turn key refrigeration systems and contract maintenance to wide range of customers, also specialising in energy efficient cooling systems
  • Key Responsibilities:
  • Diagnostic & fault finding
  • Lead installation engineer
  • Commissioning
  • Customer hand over & training
  • F Gas
  • Servicing & maintenance

Environmental Cooling Services Ltd.

Sales / Project Manager

August 2009 – June 2010

  • Environmental cooling services provide a sub contract air conditioning installation service to larger main contractors mainly in the south of the U.K
  • key Responsibilities:
  • Estimating, costing and quoting
  • Develop a “direct to customer” base
  • New technologies
  • Develop existing customer base

Space Engineering Services Ltd.

Project Manager – Mechanical & Electrical

August 2008 – May 2009

  • Space Engineering Services deliver nationwide refrigeration, mechanical and electrical services to a range of business customers. From design and manufacture, to installation and service and maintenance, Space are committed to excellence in understanding, delivering, and managing our customers’ needs
  • Whatever sector Space work in, be it retail, industrial or commercial, Space offer a total solution, bespoke to customer needs, that is underpinned by excellence in project management and a desire for continuous improvement
  • Key Responsibilities:
  • Principally appointed to successfully deliver C.C.H.P. project at Tesco shoreham-by-sea
  • Estimating
  • Tender preparation
  • Contract Management
  • Site Management
  • Procurement of materials
  • Managing Subcontractors
  • Negotiation of stage valuations & final account
  • Budget management

Pulse Services Ltd

Commissioning Engineer

Wells, Somerset

May 2001 – August 2008

  • Pulse Services Ltd are specialists in the installation and maintenance of Heating, Ventilation and Air Conditioning of many major national retail companies. They currently maintain over 1200 High Street and out of town sites. The Projects Department undertakes the design and installation of all forms of Building Services, Communication and Data Wiring, Alarm System, Ancillary Equipment, Environmental Controls and Building Management Systems for Commercial and Industrial Premises. Pulse has employed me as a Commissioning Engineer where I manage and conduct site surveys in first instance, site survey design to meet customer requirements, costing, and quoting, deploying staff for installation. Final commissioning and control set up and hand over to the customer. Any subsequent warranty work / fault diagnostics all conducted by myself. I have a thorough knowledge base and skills for the fault finding diagnostics and control side of this industry. Working on a wide range of commercial and domestic refrigeration and air-conditioning. This also includes motor vehicle air conditioning from light cars through to heavy plant and drilling rigs, swimming pool heat pumps and a wide range of manufacturers in office style VRV/VRF Systems. I am equally effective in a service and maintenance environment or system installation
  • Key Responsibilities:
  • Creation of post project commissioning / warranty reports
  • The Sale and Design of industrial, commercial and retail HVAC systems
  • The management and day to day running of HVAC projects from initial site survey through to commissioning and hand over to customer
  • Sub contract / commissioning / warranty work to major UK based ventilation / air conditioning manufacturer
  • On and off site practical problem solving with design engineers, installers and subcontractors to ensure safe and speedy progression of contracts to within specified budgets

MHR Engineering

Proprietor

1991 – May 2001

  • Marketing, selling and executing engineering solutions to local industries, including agriculture, dairy, cheese manufacturers, excavation and drilling, motor trade. – engine management diagnostics, engine and gearbox rebuilds. Design and fabrication of moto-cross quad chassis and suspension components. All aspects of on and off road motorcycle engineering / maintenance / tuning
  • Key Responsibilities:
  • Customer Liaison front end – initial sales / contact
  • Workshop planning and control
  • Stock control parts ordering
  • Preparation of Sales ledgers, purchase ledgers and VAT return
  • Manage staff and develop their skills base & provide a safe working environment
  • Ensure continued customer satisfaction

Professional Membership:

  • 1988: Associate Member of Road Transport Engineers
  • 2001: Upgrade to Associate Member of Institute of Road Transport Engineers (A.M.I.R.T.E)
  • 2001: Associate Member of Society of Operational Engineers (A.M.S.O.E)
Looking to recruit?

Find out how we can help you fill your current HVAC or FM role

Partner with us today
Looking for your next job?

If you are looking for a new job we are here to help

Start your search here